Wednesday, June 11, 2014

Packing Density

In the particle theory of matter, all matter is made up of tiny particles. You've probably drawn circles in boxes to represent solids, liquids and gases. Each of those circles is a 2-dimensional representation on the paper of a 3-dimensional sphere. So, your representation of the particle theory of matter also implies that all matter is made up of particles which are spherical in shape.

If you draw the circles so close to each other that they are touching, you label the drawing "solid".
If the circles are little bit further apart, you label the diagram "liquid".
If the circles are much further apart, you label the drawing "gas".
But, have you ever wondered just how close you can pack those spheres together?

The study of soot is becoming very important because soot in the air relates to the balance of climate: heating from light absorption versus cooling from light reflection.
Soot is made up of small round particles of carbon about 10 or 20 nanometres across. The particles stick together randomly in short chains and clumps of a half dozen or more spheres. These, in turn, clump loosely together to form larger, loose aggregates of 10 or more which over a few hours will compact into a somewhat tighter ball which is atmospheric soot.
The closer you pack the soot spheres together, then the more dense the soot becomes. That is, since all the atoms have the same mass, if you pack them more tightly together then they will occupy a smaller volume, and, since density is mass per unit volume, the density of the soot will increase.

Mathematicians have been looking at sphere packing problems for more than a hundred years. In 1831, Carl Friedrich Gauss (one of the greatest mathematicians the world has known), determined that a close-packed arrangement in which 1 sphere is surrounded by 12 other identical spheres has an average density of π/√18 ≈ 0.74
The assumed density of soot in models of atmospheric soot has, until now, been 0.74.

A research group at the National Institute of Standards and Technology (NIST), have made measurements of actual soot particles and found the density of soot to be 0.36 not 0.74
So, the researchers set out to model soot particles using 6 mm plastic spheres glued together in thousands of random combinations forming clumps of from 1 to 12 spheres which were then used to fill every available size of graduated cylinder. When they graphed their results as a function of clump size,  they got a curve which levelled off at 0.36, the same as the density of soot particles they measured, but not the same as that predicted by the close-packing of spheres according to Gauss.

It now appears that, under normal conditions (not extreme temperature or pressure), the density of close-packed particles of any size, from nanometres to tens of metres is 0.36

Reference:
C. D. Zangmeister, J. G. Radney, L. T. Dockery, J. T. Young, X. Ma, R. You, M. R. Zachariah. Packing density of rigid aggregates is independent of scale. Proceedings of the National Academy of Sciences, 2014; DOI: 10.1073/pnas.1403768111


Further Reading
http://ausetute.com.au/density.html
http://ausetute.com.au/massconv.html
http://www.ausetute.com.au/voluconv.html

Suggested Study Questions
  1. Draw a diagram to represent each of the following states of matter using the particle theory of matter:
    • solid
    • liquid
    • gas
  2. Calculate the volume of a spherical carbon particle that is 20 nanometres in diameter.
  3. Calculate the volume of a cube in which the length of each side is 20 nanometres.
  4. Calculate the ratio of the volume of the sphere to the volume of cube.
  5. Why is this ratio NOT 0.74?
  6. Draw a diagram showing the close-packing of just 2 carbon particles each with a diameter of 20 nanometres.
  7. Draw a square around each sphere to represent the volume of space occupied by the close-packed spheres and label the total volume occupied and the volume of carbon particles.
  8. For the close-packing of 2 carbon particles as drawn above, calculate the ratio of the volume occupied by the spheres to the total volume of the rectangular prism.
  9. Consider placing 1 more sphere above the 2 spheres you have already drawn. Draw a diagram of an arrangement that will occupy the
    • maximum total space
    • minimum total space
  10. Research the difference between hexagonal close packing and cubic close packing.



Tuesday, June 10, 2014

Wet, Wetting and Wettability

In Surface Chemistry, the concept of wetting or wettability is very important. Understanding wetting enables scientists to make water repellant fabrics, or, to make sponges that soak up oil spills, or to produce detergents that remove grease and oil in water.

Learn more about wetting and wettability with AUS-e-TUTE's news tutorial, game and test.
Members should log-in and go to the Surface Chemistry section for links to the new resources.

Not an AUS-e-TUTE Member?
There is a free tutorial available: http://www.ausetute.com.au/wetting.html

Sunday, June 8, 2014

Essential Elements

Most of the mass of the human body is made up of just 6 elements:
  • 65% oxygen
  • 18.5% carbon
  • 9.5% hydrogen
  • 3.2% nitrogen
  • 1.5% calcium
  • 1% phosphorus
Carbon and hydrogen are the building blocks making up organic (carbon) molecules, and so, since the human body is just an incredibly complicated organic chemical factory, it is no surprise that carbon and hydrogen make up such a huge amount of the mass of a human body. Oxygen is present in most of the biochemicals making up your body, while nitrogen is an essential component of proteins. Why is there so much phosphorus? Phosphorus and oxygen combine to make up the glue that holds your DNA together, no phosphorus, no DNA, no you! And calcium is ofcourse present in bones and teeth.
Then there are minor amounts of other elements such as potassium, sulfur, sodium, chlorine and magnesium which make up less than 1% of the remaining mass of the human body.

Some elements, like iron, are absolutely essential in order for the human body to survive, but are present in extremely minute amounts, for iron this is about 0.006%
H He
Li Be B C N O F Ne
Na Mg Al Si P S Cl Ar
K Ca Sc Ti V Cr Mn Fe Co Ni Cu Zn Ga Ge As Se Br Kr
Rb Sr Y Zr Nb Mo Tc Ru Rh Pd Ag Cd In Sn Sb Te I Xe
Cs Ba * Lu Hf Ta W Re Os Ir Pt Au Hg Tl Pb Bi Po At Rn
Fr Ra ** Lr Rf Db Sg Bh Hs Mt Ds Rg Cn Uut Fl Uup Lv Uus Uuo
* La Ce Pr Nd Pm Sm Eu Gd Tb Dy Ho Er Tm Yb
** Ac Th Pa U Np Pu Am Cm Bk Cf Es Fm Md No

Vanderbilt University Scientists have just found out that bromine is also essential.It appears that bromine is important to an enzyme that is used to make a particular type of sulfur-nitrogen bond within the collagen IV structure used to make the scaffold for cells.

Reference:
A. Scott McCall, Christopher F. Cummings, Gautam Bhave, Roberto Vanacore, Andrea Page-McCaw, Billy G. Hudson. Bromine Is an Essential Trace Element for Assembly of Collagen IV Scaffolds in Tissue Development and Architecture. Cell, 2014; 157 (6): 1380 DOI: 10.1016/j.cell.2014.05.009

Further Reading
Periodic Table
Metals and Non-metals

Percentage Composition
Mass-Mole Calculations 

Suggested Study Questions:
  1.  Give the chemical symbol for each of the following elements:
    • oxygen
    • carbon
    • hydrogen
    • nitrogen
  2. Give the name for each of the following elements:
    • Fe
    • Ca
    • P
    • K
    • Mg
  3. Give the atomic number for each of the following elements
    • sulfur
    • sodium
    • iodine
    • Cl
    • F
    • Br
  4. Make a table of the metals and non-metals named in the article above
  5. Chris the Chemist has a mass of 90 kg. Calculate the mass, in kilograms, of each of the following elements in Chris' body
    • carbon
    • hydrogen
    • oxygen
    • nitrogen
  6. Calculate the mass of iron in Chris' body in
    • kilograms
    • grams
    • milligrams
    • micrograms
  7. Calculate the moles of each of the following elements found in Chris' body
    • carbon
    • hydrogen
    • oxygen
    • nitrogen
  8. Do you think Scientists will one day claim that lead is an element essential for human life? Explain your answer.

Saturday, May 31, 2014

Surface Tension

Why are rain drops spheres?
How can you float a steel needle on water?
AUS-e-TUTE has just added new Surface Tension resources.
AUS-e-TUTE members should log-in to use the new tutorial, game, test.

Not an AUS-e-TUTE Member?
There is a free tutorial available: http://www.ausetute.com.au/surfacetension.html

Friday, May 23, 2014

Molecule with Anti-Cancer Kick

In 2013, medical researchers found a molecule that fights cancer in animals by boosting the cell's production of a powerful natural antitumor protein known as TRAIL. The Researchers referred to this anti-cancer molecule as TIC10, short for TRAIL Inducing Compound number 10.
The structure of this molecule, as confirmed by mass spectroscopy, was published at this time as is shown below:
Chemists at The Scripps Research Institute (TSRI) found a way to synthesize this molecule in the laboratory. However, when the Chemists gave their molecule to Biologists to test on cancer cells, this molecule failed to show any anti-cancer activity!
So, the Chemists asked the Biologists to supply some of the TIC10 that had shown anti-cancer activity. The Chemists spent months analyzing both TIC10 molecules to determine their exact molecular structure. And they discovered that the molecule the biologists had shown to fight cancer did not have the structure that was originally published, so the molecule that the Chemists had synthesized in their laboratory would not fight cancer cells,.
However, the Chemists found that the molecule that DOES fight cancer cells has a very similar structure. The structure of the active molecule is shown below:

Note that the structure originally published for TIC10 had the three nitrogen containing rings in a straight line. This new, correct, structure for TIC10 has two of the nitrogen containing rings in a straight line, but the third ring sticks out at an angle from the other two. Only this "angular" isomer (the molecule with a kick) shows any anti-cancer activity.

Kim D. Janda, the Ely R. Callaway Jr. Professor of Chemistry and member of the Skaggs Institute for Chemical Biology at TSRI has been quoted as saying, "One lesson from this has got to be: don't leave your chemists behind".
(http://www.sciencedaily.com/releases/2014/05/140519184505.htm)

Reference:
Nicholas T. Jacob, Jonathan W. Lockner, Vladimir V. Kravchenko, Kim D. Janda. Pharmacophore Reassignment for Induction of the Immunosurveillance Cytokine TRAIL. Angewandte Chemie, 2014; DOI: 10.1002/ange.201402133

Further Reading
Molecular Formula  
Condensed Structural Formula 
2-Dimensional Structural Formula
Skeletal Formula
Percent Composition
Functional Groups
Benzene
Mass Spectroscopy for Structural Determination

Suggested Study Questions:
  1. Refer to the structure of TIC10 as shown above. In one molecule, how many
    • carbon atoms are present?
    • hydrogen atoms are present?
    • oxygen atoms are present?
    • nitrogen atoms are present?
  2.  Write the molecular formula for a molecule of TIC10.
  3. For the TIC10 molecule, calculate the percent by mass of
    • carbon
    • hydrogen
    • oxygen
    • nitrogen
  4. Convert the skeletal structure for the active anti-cancer molecule into a 2-dimensional structural formula.
  5. Circle one benzene ring in the structure of the active anti-cancer molecule.
  6. Circle and name the functional group containing an oxygen atom on the active anti-cancer molecule.
  7. What value do you expect for the mass-to-charge (M/Z) peak on a mass spectrum of the anti-cancer TIC10 compound ?
  8. Do you think mass spectroscopy alone could be used to distinguish between the two structures proposed for TIC10 above? Explain your answer.

Tuesday, May 20, 2014

Chemical Formula

What's the difference between a molecular formula, structural formula, condensed structural formula and semi-structural formula?
I'm glad you asked :)
AUS-e-TUTE has uploaded new resources on all these topics!
AUS-e-TUTE Members should log-in to the Test Centre to use the new tutorials, games, tests etc
(The syllabus guides for all Australian States/Territories: QLD, NSW, ACT, VIC, TAS, SA and WA have been updated to include these new resources, and the USA's SAT and AP syllabus guides have also been updated).

Not an AUS-e-TUTE Member?
There are free versions of the new tutorials available to you.
Follow the links from
http://www.ausetute.com.au

Friday, May 16, 2014

What's $1 Really Worth?

Have you ever wondered what the value of the metal used to make a coin is?
The Australian $1 coin has a mass of 9 grams and is composed of:
  • 92% copper
  • 6% aluminium
  • 2% nickel
 If we convert each percentage to a mass, then the Australian $1 coin is composed of:
  • 92/100 x 9 = 8.28 g of copper
  • 6/100 x 9 = 0.54 g of aluminium
  • 2/100 x 9 = 0.18 g of nickel
The following are the approximate costs per tonne for each metal:
  • copper: $ 7000 per tonne
  • aluminium: $ 1750 per tonne
  • nickel: $ 19 000 per tonne
Now we convert the cost of each metal per tonne to a cost per gram:
  • copper: $7000/1000 = $7 per kg = 7/1000 = $0.007 per gram = 0.7 cents per gram
  • aluminium: $1750/1000 = $1.75 per kg = 1.75/1000 = $0.00175 per gram = 0.175 cents per gram
  • nickel: $19000/1000 = $19 per kg = 19/1000 = $0.019 per gram = 1.9 cents per gram
Then calculate the value of each of metal used to make an Australian $1 coin:
  • copper: 8.28 g x 0.7 cents per gram = 5.796 cents
  • aluminium: 0.54 g x 0.175 cents per gram = 0.0945 cents
  • nickel: 0.18 g x 1.9 cents per gram = 0.342 cents
The value of an Australian $1 coin is
5.796 cents + 0.0945 cents + 0.342 cents = 6.2325 cents!

Further Reading:
Percentage Composition Calculations
Mass Conversions

Calculate the value of each of the following coins:
  1. Australian $2 coin has a mass of 6.60 g and is composed of  92% copper, 6% aluminium, 2% nickel
  2. Australian 50 cent coin has a mass of 15.55 grams and is composed of 75% copper, 25% nickel
  3. Australian 20 cent coin has a mass of 11.31 grams and is composed of 75% copper, 25% nickel
  4. Australian 10 cent coin has a mass of 5.66 grams and is composed of 75% copper, 25% nickel
  5. Australian 5 cent coin has a mass of 2.83 grams and is composed of 75% copper, 25% nickel
  6. An American nickel (5 cent coin) has a mass of 5.00 grams and is composed of 75% copper, 25% nickel
  7. An American dime (10 cent coin) has a mass of 2.268 grams and is composed of 91.67% copper, 8.33% nickel
  8. An American quarter (25 cent coin) has a mass of 5.67 grams and is composed of 91.67% copper, 8.33% nickel