Showing posts with label concentration. Show all posts
Showing posts with label concentration. Show all posts

Saturday, April 30, 2022

Converting Between Concentration Units

The concentration of carbon dioxide dissolved in water is about 0.000011 mol/L, while the concentration of carbon dioxide in blood is about 1100 ppm. It is not easy to tell which of these two solutions is the most concentrated because they are in different units. However, if we were to convert the concentration of carbon dioxide in water from mol/L to ppm, we could easily compare these two concentrations.

AUS-e-TUTE has just added a new tutorial, game, test, drill, prac, flashcards, quiz, worksheet wizard, and problem solving template to help!
 
Members should log-in to use these new resources: https://www.ausetute.com.au
 
If you are not an AUS-e-TUTE member you can view the tutorial for free at https://www.ausetute.com.au/concconv.html

Thursday, January 13, 2022

Mass Concentration (m/v)

 There are lots of ways to measure concentration in chemistry.

One method is to divide the mass of solute by the volume of solution: m/v

This is called a mass concentration and common units for mass concentration are g/L or g L-1

AUS-e-TUTE has just added new teaching and learning resources for mass concentration calculations (game, test, drill, quiz, worksheet and problem solving template).

Members should log-in to use these new resources.

Non-members can go to the "free-to-view" tutorial at https://www.ausetute.com.au/massconc.html


Saturday, May 2, 2020

Monoprotic acid pH with a concentration of 0.022M

Question: What is the pH of a monoprotic acid with a concentration of 0.022 M?

Answer:
1. Assume this is a strong monoprotic acid so that it fully dissociates: HA → H+ + A-

2. [HA] = [H+] = 0.022 M

3. pH = -log10[H+] = -log10[0.022] = 1.7

Find out more, and see questions with worked solutions, at https://www.ausetute.com.au/phstronga.html

What is the weight/volume percent (w/v) of a solution prepared from 50 g NaCl and 2.5 L of water?

Question: What is the concentration, weight/volume percent (w/v), of a solution prepared from 50. g NaCl and 2.5 L of water?

Answer:
1. w/v % is a measure of the concentration of a solution.
Units are often given as g solute/100 mL solvent.

2. w/v% = (mass solute in grams/volume of solution in mL) × 100

3. w= mass solute = 50 g
v = volume of solution = 2.5 L = 2.5 L × 1000 mL/L = 2500 mL (assuming the NaCl does NOT increase the volume as it dissolves in the water)

4. w/v% = (50 g/2500 mL) × 100 = 2 g/100 mL

Find out more, and see worked solutions to questions, at https://www.ausetute.com.au/wtvol.html

Friday, May 31, 2019

24 Carat Chemistry

I was trying to buy a present for my mum for Mothers' Day. "A gold chain," I thought, "would be a nice present". But when I got to the jewellery shop I found that there is a huge variety of "gold chains", 24 carat gold, 18 carat gold, 9 carat gold, 995, 750, 375, white gold, rose gold...
So what is a carat?
What do those numbers mean?
How can "gold" be different colours?

Read all about it in the June 2019 issue of AUS-e-NEWS

Subscribe to AUS-e-TUTE's free quarterly newsletter at https://www.ausetute.com.au/ausenews.html

Sunday, December 16, 2018

pH of Weak Acid After Dilution

What happens to the pH of a solution of weak acid, such as acetic acid, if you dilute it by adding water to it?
How much water would you have to add to 100 mL of 0.20 mol L-1 acetic acid in order to make a solution with a pH of 3.0 ?
What is the pH of 1 × 10-11 mol L-1 acetic acid?
AUS-e-TUTE can help you answer these questions with our new resources.
AUS-TUTE Members should log-in to access the new "pH of Weak Acid After Dilution" tutorial, game and test (with worked solutions).
A "free-to-view" tutorial is currently available for non-members at:
https://www.ausetute.com.au/phdilwa.html

Friday, May 27, 2016

Blood Alcohol Concentration

Drinking alcohol impairs your driving ability, so legal limits are set, not for the amount of alcohol you consume, but on the effects of alcohol in your system. In Australia we measure the amount of alcohol in your blood (BAC or Blood Alcohol Concentration) and have set a "maximum legal limit" of 0.05% for most drivers (BAC for learner, provisional and professional drivers is less).
A Blood Alcohol Concentration, BAC, of 0.05% is a weight per volume percentage, w/v%, that is, a BAC of 0.05% is 0.05 grams of alcohol in every 100 mL of blood.
Your Blood Alcohol Concentration, BAC, is effected by the alcoholic beverages you consume. The concentration of alcohol varies between different types of alcoholic beverages, and is given as w/v% concentration as shown in the table below:

Alcoholic BeverageTypical Alcohol Concentration
light beer2.7%
ordinary beer4.9%
wine12%
spirits40%
port or sherry20%

So drinking 100 mL of wine will increase your blood alcohol concentration more than drinking 100 mL of beer.

But drinking alcoholic beverages is not the only way that alcohol can enter your blood stream. Alcohol is also present as an ingredient in other things you might ingest such as in some mouthwashes where it is used for its anti-bacterial properties, for example, original formula Listerine mouthwash contains 26.9% alcohol. Alcohol is also found as the solvent in many over-the-counter and prescription medications, for example, Benedryl has an alcohol concentration of 14% while Benedryl Decongestant has an alcohol concentration of 5%.

The amount of alcohol you ingest will be one factor in determining your blood alcohol concentration, but another factor is the rate at which your body removes alcohol from your blood, and this differs between individuals. There is no way to determine your blood alcohol concentration short of chemical analysis. Since it is not practical for every driver to do this before they set off, guidelines are produced based on the number of "standard drinks" that an "average person" can consume in an hour before he will be "over the legal limit". It should be noted that some people will need to drink less than the guidelines while there are some people who can consume more.
In Australia, a "standard drink" is one containing 10 g of alcohol.
So, in order for you estimate the number of "standard drinks" you have ingested, you need to know the alcohol concentration in your drink and the volume of the drink you drank. Which is not something you are likely to do while standing at the bar ordering your drink!
For this reason, Government authorities issue the guidelines showing the "standard drink" as volumes of different types of alcoholic beverages:


Alcoholic BeverageTypical Alcohol ConcentrationStandard Drink
light beer2.7%1 schooner, 425 mL
ordinary beer4.9%1 middy, 285 mL
wine12%1 glass, 100 mL
spirits40%1 nip, 30 mL
port or sherry20%1 glass, 60 mL

In order to maintain a blood alcohol concentration under 0.05%, an "average" person can consume 2 standard drinks in the first hour, followed by 1 drink each following hour. If your legal limit is 0.02%, then even just 1 drink can put you over the legal BAC for driving! And, ofcourse, if your "legal limit" is 0%, you cannot ingest any alcohol at all before driving. Be aware that an average person takes about 1 hour to remove the alcohol in 1 standard drink from their blood stream, so it is quite possible for you to be over the "legal limit" hours after you begin drinking!

Further Reading:
Weight/Volume Percentage Calculations: http://www.ausetute.com.au/wtvol.html
Molarity (mol L-1 concentration) : http://www.ausetute.com.au/concsols.html

Suggested Study Questions:
  1. Determine the mass of alcohol in 100 mL of each of the following drinks:
    • light beer
    • ordinary beer
    • wine
    • spririts
    • port
  2. Determine the mass of alcohol in 250 mL of each of the following drinks:
    • light beer
    • ordinary beer
    • wine
    • spririts
    • port
  3. Calculate the mass of alcohol present in:
    • 425 mL of light beer
    • 285 mL of ordinary beer
    • 100 mL of wine
    • 30 mL spririts
    • 60 mL port
  4. Assuming the recommended dose of Benedryl, or Benedryl Decongestant, is 20 mL, what mass of alcohol is present in each dose?
  5. How much of each cough mixture above do you need to consume in order to ingest the same amount of alcohol as present in a standard drink?
  6. Explain why the volume of a "standard drink" differs for different types of alcoholic beverage.
  7. In one hour, Phyl the Physicist drinks 1 schooner of ordinary beer and 1 glass of wine at Science Expo.
    • What mass of alcohol has Phyl consumed?
    • How many "standard drinks" has Phyl consumed?
  8. Also at the Science Expo is Bobby the Biologist who mixes herself a Manhattan; 1 nip of vermouth and 2 nips of whiskey, and a dash of bitters, served in a chilled glass with ice and a cherry garnish.
    • What is the minimum mass of alcohol Bobby will consume when she drinks this?
    • Approximately how many standard drinks is this equivalent to?
  9. Sam the Science student has a cold. She takes a 20 mL dose of Bendryl before going to the Expo. In the same hour, Sam drinks 1 middy of light beer at the Expo.
    • What mass of alcohol has Sam consumed?
    • How many "standard drinks" has Sam consumed?
  10. Chris the Chemist is the "designated driver" for his team members at the Science Expo. So Chris drinks a 100 mL cup of mulled wine, which is red wine that has been heated with various spices. Chris thinks the alcohol content of his drink must be less than that of 1 "standard drink". Do you agree? Explain your answer.
  11. Assuming "alcohol" refers only to ethanol (ethyl alcohol), convert the following concentrations in w/v% to concentrations of ethanol in mol L-1 (molarity):
    • light beer 2.7%
    • ordinary beer 4.9%
    • wine 12%
    • spririts 40%
    • port 20%
  12. Ethanol is a liquid at room temperature and pressure. Why do you think alcohol concentrations are given in units of grams per 100 mL? Explain your answer

Thursday, May 19, 2016

Nano-zinc oxide and the Environment

Increasingly, we are making use of nanoparticles because of their unique properties compared to the same substance in bulk material. Many cosmetics, including sunscreens and sunblocks, now contain nanoparticles. When you go swimming or wash, these nanoparticles are washed off. Depending on where the nanoparticles are washed off, the waste water may directly enter a natural water system such as a river or ocean, it may end up in sewerage sludge, and it may eventually end up on land. What scientists do not know is just how many nanoparticles are entering the earth, air and water.

It is estimated that carbon nanotubes, which form part of a composite material in objects such as bicycle frames and tennis rackets, can take 10 years to breakdown and be released into the environment. On the other hand, about half of the cosmetic nanoparticles enter our waste water within one year.

Europe currently produces about 39,000 tons of nano-titanium dioxide per year, and it is estimated that the concentration of these nanoparticles in effected areas is now 61 micrograms per kilogram of ground. For humans, the maximum "safe" levels for exposure to these nanoparticles is set at:


  • 2,500 mg/kg/day for oral exposure
  • 2.4 mg/m3 for inhalation
While small amounts of zinc oxide are beneficial to plant growth, larger amounts can impair seed germination. Plants take up the free zinc ions in aqueous solution rather than the zinc oxide particles. This zinc becomes incorporated into the plants we eat. Zinc is an essential element in the human diet. The recommended dietary allowance of zinc for men is 11 mg/day, and for women is 8 mg/day. There are concerns that the increasing level of zinc in  plants may lead to accumulation of zinc in humans which will be detrimental to our health. Ingesting more than about 100 mg of zinc per day may lead to chronic toxicity.

Research into the environmental impact of nanoparticles, and their impact on plant and animal health, will continue for a long time.

Reference:
https://www.sciencedaily.com/releases/2016/05/160512084646.htm

Further reading
Nanotechnology: http://www.ausetute.com.au/nanotech.html
Graphene and Fullerenes: http://www.ausetute.com.au/graphene.html
Solutions Concepts: http://www.ausetute.com.au/solutions.html
Weight percent (w/w): http://www.ausetute.com.au/weightpc.html
Parts per MIllion (ppm): http://www.ausetute.com.au/partspm.html

Suggested Study Questions:

  1. What is meant by the term "nanoparticle"?
  2. If a nanoparticle of zinc oxide has a diameter of 20 nm, what is its diameter in:
    • metres
    • centimetres
    • millimetres
    • micrometres
  3. Give an example of one property of bulk zinc oxide that is different to nanoparticles of zinc oxide.
  4. Explain why zinc oxide nanoparticles are used in sunscreens.
  5. What is a carbon nanotube?
  6. Why are carbon nanotubes used in the production of bicycle frames?
  7. Why are concentrations of titanium dioxide nanoparticles in soil given in units of micorgrams per kilogram of soil rather than in moles per litre?
  8. Convert the following concentrations into parts per million (ppm)
    • 2,500 mg kg-1
    • 2.4 mg m-3
  9. Using the recommended dietary allowance figures in the article, determine the mass in grams of zinc allowed for a:
    • 58 kg woman each day
    • 79 kg man each day
  10. A typical vitamin pill contains 25 mg of zinc. By consuming 1 tablet per day, will the man or woman above exceed the recommended daily allowance of zinc?
  11. 6 raw oysters contain 32 mg of zinc. How many oysters can the man and woman above eat before exceeding the recommended dietary allowance of zinc?
  12. 85 g of cooked beef contains 7 mg of zinc. What mass of beef can the man and woman above ingest before exceeding the recommended dietary allowance of zinc.
  13. 28 g of dry roasted cashews contain 1.6 mg of zinc. What mass of zinc, in grams, is present in 750 g bag of cashews?
  14. 1/2 cup of cooked red kidney beans contain 0.9 mg of zinc. How many cups of red kidney beans would our man and woman above need to consume in order to achieve their recomended dietary allowance of zinc?
  15. Do you think you should take a daily vitamin pill containing zinc? Justify your answer.



Saturday, April 11, 2015

Effect of Temperature on Solubility

What happens to the solubility of a salt or a gas at constant pressure when the temperature of the solution changes?
This can be treated as just a special case of Le Chatelier's Principle .....

And AUS-e-TUTe has just added new resources to help you understand the effect of temperature on solubility.
AUS-e-TUTE Members should log-in to use the new tutorial (includes a drill), game, test and exam.

If you are not an AUS-e-TUTE member, there is non-interactive "free-to-view" tutorial currently available for evaluation purposes at http://www.ausetute.com.au/solubilitylcp.html


Get a better understanding of concepts in chemistry, and improve your problem solving ..... join AUS-e-TUTE today!



Wednesday, July 9, 2014

Dilution Factors

I've always thought that an understanding of dilution factors can make a Chemistry student's life a whole lot easier, but at the same time, always avoided teaching it (or indeed making reference to it) because of the muddle students make of it (thinking that every calculation involving a solution can be dealt with using dilution factor "formulae") .... and even worse, biology students always seem to have a desire to just "add volumes" together (even if the volumes are not additive!).

The new dilution factor resources are available to AUS-e-TUTE Members in the Members Only area (and teachers will find a worksheet wizard in the Teachers Area).

Not a member?
You can find out about AUS-e-TUTE Membership at  http://www.ausetute.com.au/membership.html

and you can join AUS-e-TUTE at http://www.ausetute.com.au/register.html

There is a free-to-view tutorial currently available at http://ausetute.com.au/dfactor.html


Thursday, November 28, 2013

Salts of Drugs a Health Risk

Many studies have shown that excess salt is harmful to heart health, but many commonly prescribed medicines have sodium added to improve their absorption into the body, but the effect of doing this has not been known. For example, 1 Alka-Seltzer tablet contains 324 mg of aspirin (the drug) and 445 mg of sodium.
University of Dundee and College of London researchers have found that a person taking the maximum, daily dose of some medicines would exceed the recommended daily dietary intake limits for sodium. In Australia, the total maximum recommended limit of sodium for adults should be less than 2300 mg per day (less for children). The label on the Alka-Seltzer tablets carries a warning that you should not take more than 8 tablets per day.
In the study, the researchers found that patients taking the sodium-containing medication had a 16% increased risk of a heart attack, were 7 times more likely to develop high blood pressure, and, were 28% more likely to die, compared with patients who took the non-sodium containing versions of the same drug.

So why do we add sodium to drugs if it is potentially harmful?

We do this because many drugs are actually insoluble in water. The cells in your body are made up mostly of water, so if you want to be able to transport a drug around the body, and have it absorbed into cells, it is beneficial if the drug is soluble in water.

How do we add sodium to drugs?

If the drug is, for example, a weak acid like aspirin, then it is not very soluble in water.
Being a weak acid, though, aspirin can undergo a proton transfer (neutralisation) reaction with a base such as sodium hydroxide. The product of a neutralisation reaction are salt and water.
acid + base → salt + water

aspirin + sodium hydroxide → sodium salt of aspirin + water

The sodium salt of aspirin readily dissolves in water by dissociating into positive sodium ions and negative "aspirin" ions.


Reference:
BMJ-British Medical Journal (2013, November 26). High salt levels in medicines increase risk of cardiovascular events. ScienceDaily. Retrieved November 28, 2013, from http://www.sciencedaily.com­ /releases/2013/11/131126191557.htm 

Further Reading
aspirin
mass conversions 
ppm
molarity
neutralisation
proton transfer reactions
acid dissociation constants

Suggested Study Questions: 
  1. Convert these masses in milligrams to masses in grams
    • 324 mg
    • 445 mg
  2. The label on the Alka-Seltzer packet recommends dissolving 2 tablets in water. For these two tablets, calculate the mass in milligrams of
    • aspirin
    • sodium
  3. If you were to take the maximum number of tablets, 8, in a day, how much of each of the following substances would you be ingesting?
    • aspirin
    • sodium
  4. Would you be exceeding the recommended daily dietary intake limits for sodium in Australia? Explain your answer.
  5. A low salt food is one that contains less than 120 mg of sodium per 100 g of food. If Alka-Seltzer were to be considered a low salt food, what would the mass of each tablet need to be?
  6. Aspirin has the molecular formula C9H8O4. What is the molar mass of aspirin?
  7. The sodium salt of aspirin has the molecular formula C9H7O4-Na+. What is the molar mass of the sodium salt of aspirin?
  8. Calculate the mass of sodium in 1 Alka-Seltzer tablet due to the sodium salt of aspirin.
  9. Compare the mass of sodium calculated above to the actual mass of sodium present in 1 Alka-Seltzer tablet according to the package. How would you explain the difference in the two masses?
  10. If a person dissolved 2 Akla-Seltzer tablets in 150 mL of water, what is the concentration of sodium ions in the water in
    • mol/L
    • mg/L
    • ppm
  11. Recommendations for the daily intake of potassium are higher than those for sodium at 4700 mg day, so one way to alleviate the sodium problem in aspirin tablets might be to replace the sodium with potassium. Describe one way that you could produce the potassium salt of aspirin.
 

Sunday, June 16, 2013

Methanol and the Home-Brewer

In June 2013, a young man in Queensland died as a result of drinking homemade liquor. It is believed that the liquor contained a toxic level of methanol (also known as wood alcohol). Drinking 10 mL of pure methanol can cause permanent blindness, drinking 30 mL of methanol can kill you.

The first step in the production of homemade liquors, is the fermentation of sugar.
Methanol, CH3OH,is formed during fermentation.
When fermenting 6 kg of sugar dissolved in water for the production of distilled spirits such as whiskey or vodka, the home-brewer (and home-distiller) will typically find that the concentration of methanol in their brew is about 3 parts per million.

Many fruits are used by the home-brewer as the source of sugar to be fermented. Each fruit will lend a distinctive flavour to the final product. But fruits that are high in pectin will produce greater concentrations of methanol. Apples, apricots, guavas, quinces, plums, gooseberries, and citrus fruits like oranges, all contain high levels of pectin, typically more than 1% by mass pectin. Grapes, cherries and strawberries contain low levels of pectin, less than 1% by mass pectin.

Pectin contains  galacturonic acid which has the structural formula shown below:
In pectin, about 80% of the carboxyl groups in galacturonic acid are esterified with methanol. The remaining non-esterified carboxyl groups exist as the acid, or as salts with sodium, potassium or calcium. When pectin is broken down by enzymes during the brewing process, the methyl esters react with water to produce methanol.

The second step in the production of homemade liquor is the distillation step.
This is the crucial step in removing as much of the toxic methanol as possible.
The boiling point of methanol is about 65oC, but the boiling point of ethanol (the desired product) is about 78oC. During the distillation process, the first fraction collected should contain the methanol. This fraction should be collected and discarded. The next fraction should contain the desired liquor. It is highly recommended that any distillate collected after about 96oC also be discarded.


Reference:
http://www.couriermail.com.au/news/queensland/ballandean-man-bill-lynam-who-lost-his-son-joel-to-homemade-liquor-poisoning-is-thankful-that-other-son-joshua-survived/story-fnihsrf2-1226664893229

Further Reading
http://ausetute.com.au/members/alkanolp.html (members only tutorial on alkanols)
http://ausetute.com.au/members/carboxyl.html (members only tutorial on alkanoic acids) 
http://ausetute.com.au/partspm.html 
http://ausetute.com.au/density.html 

Suggested Study Questions:
  1. Draw the structural formula for methanol.
  2. Locate the functional group present in methanol on the structural formula above. Name the functional group. 
  3. At 25oC methanol has a density of  0.79 g mL-3. Calculate the mass of methanol present in a lethal dose of pure methanol .
  4.  Convert the concentration of methanol given for homemade whiskey into a concentration in g mL-1.
  5. Assume the young man who died drank homemade whiskey. What minimum volume of homemade whiskey did he drink?
  6. For galacturonic acid given the:
    • molecular formula
    • molar mass
  7.  On the structural formula for galacturonic acid identify and name the functional groups present.
  8. Draw the structure for the sodium salt of galacturonic acid.
  9. Draw the structure for galacturonic acid esterified with methanol.
  10. Give the molecular formula and molar mass for the structure above.
  11. Apples contain about 1% by mass pectin. 10 kg of apples are to be used in the production of a homemade liquor. What mass of pectin will be present?
  12. Assume exactly 100% of the carboxyl groups in galacturonic acid are esterified with methanol. How many moles of the ester are present in 10 kg of apples?
  13. Write an equation representing the reaction between this ester and water to form methanol  and galacturonic acid.
  14. How many moles of methanol could be produced by the break down of pectin in 10 kg of apples?
  15. Assuming the young man who died had drunk this apple concoction without distilling and removing the methanol, what minimum volume of fermented apple-drink would he have had to have drunk?
  16. Why do you think most countries have outlawed home-distilling?

Sunday, February 24, 2013

Drunken Fruit Flies

Wasps are a major killer of fruit flies. They inject their eggs inside fruit fly larvae, then, when the wasp egg hatches, the wasp larva starts eating the fruit fly lava from the inside!
Scientists at Emory University have found that fruit flies prefer to lay their eggs in an environment  with a "high" concentration of ethanol. The fruit flies have evolved a certain amount of tolerance to this toxic ethanol, but the wasps who inject their eggs inside fruit fly larvae find the ethanol level to be lethal. Furthermore, fruit fly lava that have been infected with wasp larva tend to prefer to eat food with a high ethanol content, this raises their blood alcohol level and helps kill the wasp larva.

The most common natural source of ethanol is rotting fruit. Yeasts on rotting fruit can ferment the fruit sugars, like fructose, to produce ethanol:
C6H12O6 → 2C2H5OH + 2CO2
This fermentation reaction takes place in anaerobic environments, that is, environments in which oxygen is not present.
The concentration of ethanol in rotting fruits has been  found to be between 0.04 and 0.72 v/v%. By comparison, the ethanol content in beer is usually between 3 and 6 v/v%, while the ethanol content of wine is between 8 and 11 v/v%.
Volume/volume (or volume) percent is a common way to refer to the concentration of alcoholic solutions. It refers to the volume of solute divided by the volume of solution which is then multiplied by 100, that is:
v/v% = V(solute)/V(solution) x 100
Beer that is 3 v/v% ethanol contains 3 mL of ethanol in every 100 mL of beer.
Wine that is 11 v/v% ethanol contains 11 mL of ethanol in every 100 mL of wine.

This preference for eating rotting fruit containing ethanol displayed by the fruit flies seems to be uncommon. Most animals, including humans, seem to prefer ripe, but not rotting, fruit.

References:
  1. B. Z. Kacsoh, Z. R. Lynch, N. T. Mortimer, T. A. Schlenke. Fruit Flies Medicate Offspring After Seeing Parasites. Science, 2013; 339 (6122): 947 DOI: 10.1126/science.1229625
  2. Neil F. Milan, Balint Z. Kacsoh, Todd A. Schlenke. Alcohol Consumption as Self-Medication against Blood-Borne Parasites in the Fruit Fly. Current Biology, 2012; 22 (6): 488 DOI: 10.1016/j.cub.2012.01.045

Further Reading:
Fermentation
Carbohydrates
Naming Alcohols
Density

Suggested Study Questions:
  1. Calculate the volume of ethanol in a stubby (375 mL) of full strength beer (ethanol concentration 4.8 v/v%).
  2. An average standard wine glass has a volume of 150 mL. What volume of ethanol is present in a standard wine glass of white wine with an ethanol concentration of 11.5 v/v%?
  3. Port is an example of a fortified wine, that is, a wine that has had an additional distilled beverage like brandy added to it to increase its alcohol content to about 17.5 v/v%. A standard port glass has  a volume of 60 mL. Calculate the volume of ethanol in a standard glass of port.
  4. The specific gravity (density) of ethanol is 0.789 g/mL. Calculate the mass of ethanol present in a stubby (375 mL) of
    • full strength beer (5 v/v% ethanol)
    • light beer (2.7 v/v% ethanol)
  5. Spirits such as rum and vodka, have an ethanol concentration of approximately 40 v/v%. A standard "nip" is 30 mL. Calculate:
    • the volume of ethanol in a nip of vodka
    • the mass of ethanol in a nip of vodka
  6. The alcohol content of Marsala wine is increased by allowing water to evaporate off it. The concentration of ethanol in Marsala wine will reach about 18 v/v%. Calculate:
    • volume of ethanol in a 750 mL bottle of Marsala
    • mass of ethanol in this bottle of Marsala wine
  7. A particular type of wine barrel holds 225 L of wine. Calculate the mass of ethanol present if the wine in the barrel is
    • red wine (13 v/v% ethanol)
    • white wine (11.5 v/v% ethanol)
    • champagne (12 v/v% ethanol)

Thursday, November 1, 2012

Glow in the Dark Ice

No (chemistry) party is complete without edible "glow in the dark" ice cubes.
To make your ice cubes:
  •  open up some tonic water (or a bottle of "bitter lemon")
  • pour it into an ice cube mold
  • place the mold in the freezer until the tonic water solidifies (freezes)
To make your ice cubes glow in the dark:
  • place some ice cubes in a glass of water (or cordial or carbonated beverage)
  • place the glass under a UV ("black") light (even strong fluorescent light will work but the effect is not as dramatic!) and turn off the room's lights
Results : your glass of water and ice should glow a nice blue colour.


This is an example of fluorescence, the emission of light by a substance that has absorbed electromagnetic radiation. In the case of the tonic water, there is a compound in the tonic water that absorbs light in the ultraviolet region of the electromagnetic spectrum (wavelength ~ 350 nm), and emits light in the visible region of the electromagnetic spectrum (wavelength ~ 450 nm corresponding to bright blue or cyan).
The compound in the tonic water that fluoresces is known as quinine, with the molecular formula C20H24N2O2 and the structural formula shown below:
Quinine occurs naturally in the bark of the cinchona tree which is found in the tropical Andes forests of western South America. Quinine was the first effective treatment for malaria. The first medicinal uses involved drying the bark of the cinchona tree then grinding it into a powder which was then mixed into a drink (often wine), which was then drunk. The effective medicinal ingredient of the bark, quinine, was finally isolated in 1820 by French researchers Pierre  Joseph Pelletier and Joseph Bienaime Caventou.
During World War II, the Axis Powers had control over most of the commercial quinine production centres, so the Allied Powers were cut off from their supply of quinine, a necessary war-time commodity for fighting in the tropics. Then in 1944, the American chemists R.B. Woodward and W.E. Doering succeeded in producing quinine in the laboratory.




Quinine is no longer recommended as a first-line treatment of malaria, instead another plant-derived organic compound is used, artemisinin, but that's a different story.

Further Reading:
Emission Spectroscopy
Empirical Formula
Relative Molecular Mass (molecular weight, formula mass, formula weight)
Percent Composition
Parts per Million Concentration
Functional Groups


Suggested Study Questions:
  1. Draw a diagram to describe what happens when quinine absorbs UV light and emits bright blue/cyan light.
  2. Imagine you were to view the light emitted by the tonic water through a spectroscope. Draw a sketch of the emission spectrum you would expect to see.
  3. Use the molecular formula for quinine to find its empirical formula.
  4. Calculate the relative molecular mass (molecular weight, formula mass, formula weight) of quinine.
  5. Calculate the percentage of each element present in quinine.
  6. Assume a 1L bottle of tonic water contains 15ppm quinine. Calculate the
    • mass of quinine contained in the bottle
    • moles of quinine in the bottle
    • quinine concentration in mol L-1
  7. Using the structural formula for quinine, identify an aliphatic double bond (that is, a double bond that does not occur in an aromatic ring), an aromatic (benzene) ring, and an hydroxyl group

Sunday, September 23, 2012

Green Hair

Imagine you are living in a small town in Sweden.
You go to bed one night, naturally blonde.
When you wake up in the morning and look in the mirror your blonde hair has turned green!
Not only that, but your naturally blonde neighbour also has green hair!

This actually did happen in 2011, and, no doubt, caused a certain amount of distress.

Where would you begin in order solve the "green hair" mystery?
What could turn hair green?

Blonde hair often turns green after swimming in chlorinated pool water.
Copper, used in compounds to reduce algae growth in water, can be present in concentrations of about 0.5 ppm in pool water. When bleach (often sold as "liquid chlorine") is added to the pool water it oxidizes the copper resulting in a pretty green colour, and the oxidized copper binds to the proteins in the hair.
If you happen to have copper pipes in your bathroom, you've probably seen "green stains" on the pipes where the copper has been oxidized.

So, back to the story in Sweden.
Samples of drinking water were taken from a number of homes in order to measure the amount of copper present but the concentration of copper in the water did not exceed the recommended guidelines (that is, the copper ion concentration was less than 1 ppm).

However, in new houses, when hot water was left overnight and tested the next morning, the concentration of copper in the water increased dramatically. On further investigation it was discovered that the hot water pipes in new houses lacked the coating that the pipes in older houses had. So, overnight, when the water in the pipes was still and not being continuously "flushed" through the pipes, copper particles were being added to the water.

For solving the "Swedish Green Hair Mystery" Johan Pettersson was rewarded with a 2012 Ig Nobel Prize for Chemistry.


References:
http://www.thelocal.se/37994/20111217/
http://www.improbable.com/ig/winners/#ig2012

Further Reading 
http://www.ausetute.com.au/waterana.html 
http://www.ausetute.com.au/aas.html 
http://www.ausetute.com.au/partspm.html 
http://www.ausetute.com.au/concsols.html 
http://www.ausetute.com.au/weightpc.html 
http://www.ausetute.com.au/corrosion.html 

Suggested Study Questions:
  1. Describe 2 methods you could use to detect the presence of copper ions in water.
  2. Describe the process by which Atomic Absorption Sepctroscopy (AAS) could be used to measure the concentration of copper ions in a water sample.
  3. Describe a way that you could prevent copper from entering the water in the copper water pipes in this Swedish town.
  4. Copper is often present in soils at a concentration of around 50 ppm. What mass of copper would be present in 0.5 tonne of soil?
  5. A particular pool contains 40,000 L of water. If the pool water contains 0.5 ppm copper ions, what is the concentration of copper ions in mol L-1 ?
  6. Chocolate can contain 10 mg/kg  copper. What mass of copper is present in a 250 g bar of chocolate?
  7. Doses of copper that exceed 50 mg/kg of body mass can be lethal. Calculate the mass of copper that would be the lethal limit for an 80 kg adult.
  8. What advice could you give the inhabitants of this Swedish town in order for them to avoid having green hair?

Saturday, August 20, 2011

Arsenic in Air, Hair and Water

On Saturday 20th August 2011, the Sydney Morning Herald reported that the chemical company Orica "discharged up to 1.2 megalitres of effluent containing traces of arsenic above its environmental protection licence cap yesterday afternoon".
Arsenic is toxic, it disrupts the transport of energy within cells and metabolism. The minimal lethal dose of arsenic in adults is about 1mg per kilogram of body mass per day, but arsenic trioxide is about 500 times more toxic than pure arsenic.

The Romans used arsenic compounds, especially naturally occurring arsenic sulfides, as medicines. The Roman writer Dioscorides (40-90) wrote in De Materia Medica (Medical Matters) that arsenic sulfides could be used to treat warts and skin eruptions, but warned that the remedy could cause the patient's hair to fall out! It is believed that Agrippina used arsenic trioxide to murder her husband so that she could marry her uncle, the Emporer Claudius.
At about the same time, the Chinese were using arsenic compounds to kill flies and rodents while Indians were using them to preserve paper from attack by insects.

In medieval Europe, arsenic trioxide was being used to treat malaria, while arsenic sulfides were used to treat arthritis, asthma, tuberculosis, and diabetes.

In 1809, Dr. Fowler's Solution first appeared in the London Pharmacopoeia, and it was considered to be a cure for almost everything! Fowler's solution was a mixture of potassium arsenite in lavender water. It was prepared by dissolving 10g of arsenic trioxide and 7.6g of potassium hydrogen carbonate in 1L of distilled water, then adding a little alcohol and lavender oil. The maximum single dose recommended was 0.5mL of Fowler's Solution which could be added to a glass of water or wine.

Arsenic was very common in European households up until the late 19th century.
Arsenic was being used to provide brilliant colours in dyes and paints:
  • yellow orpiment, As2S3 (a mineral in use since Ancient times)
  • red realgar, As4S4 (a mineral in use since Ancient times)
  • Scheele's Green, copper arsenite, CuHAsO3 (first produced in 1778)
  • Emerald Green, a combination of copper acetate and copper arsenite (first produced in 1822)
In the 19th century, arsenic-based green colours were being used to colour paint, wallpaper, soap, lampshades, children's toys, candles, soft furnishings, and even food. By the late 19th century, Gosio's disease, sickness resulting from breathing the air in rooms decorated with arsenic compounds, was identified. The deadly vapour was not identified as trimethylarsine until the 1930's.

Napoleon Bonaparte died on 6th May 1821 at Longwood House on Saint Helena. Samples of Napoleon's hair were analysed in 1995 and were found to contain between 33ppm and 17ppm of arsenic, the maximum "safe" limit is currently considered to be about 3ppm and the normal level is about 1ppm. While some people believe that Napoleon was deliberately poisoned,it is possible that green furnishings at Longwood House could be to blame for the high levels of arsenic in his body.

Arsenic has also been discovered in the hair of "mad" King George III of Great Britain who died in 1820. In 2003, samples of the King's hair found in the Science Museum London were analyzed and found to contain about 17ppm arsenic.

in 1904, Julius Nieuwland added an aluminium chloride catalyst to a mixture of acetylene and arsenic trichloride to produce an arsenic compound that came to be known as Lewisite. Unfortunately Nieuwland had taken no safety precautions so he breathed in some of the vapour, was taken ill and spent the next few days in hospital. During World War I, Winford Lewis heard about Nieuwland's earlier experiment, and he learnt how to produce the toxic compound under carefully controlled conditions so that it could be used as a weapon. By November 1918, the USA was shipping deadly Lewisite to Europe. Lewisite was then used by the Japenese against the Chinese in Manchuria in 1940, and by Saddam Hussein in the Iran-Iraq war in the 1980's.

Tube wells, drilled in the 1970's in West Bengal, India and Bangladesh, were installed in a drive by the United Nations Children's Fund (UNICEF) to provide safe drinking water for a population that had traditionally taken its water from contaminated streams, rivers, and ponds, and therefore suffered from water-borne diseases such as gastroenteritis, typhoid and cholera. By 1983 the population, more than 30 million people, were showing signs of arsenic poisoning. The water in many of the wells had arsenic levels of between 50ppb and 4000ppb. At the time, the World Health Organisation (WHO) stated that drinking water should not contain more than 10μg/L.

In the 20th century, copper arsenite, also known as Paris Green, and lead arsenate have been used as a horticultural spray to kill moths on apple trees, but these compounds have now been phased out. Chromium copper arsenate, used to treat wood to prevent it rotting and being eaten by termites, has been phased out in some countries like Australia, Canada and the USA, but is still being used in others. In the electronics industries, arsenic is added to silicon and germanium semiconductors to provide electrons to the crystal lattice. Gallium arsenide is a semi-conductor which has the ability to convert electric current to laser light, so this is a growing use for the world's arsenic.

Further Reading
Volume Conversions
Parts per Million Concentration
W/V %
Molarity
Writing Ionic Formulae
Oxidation States (Numbers)

Study Questions:
  1. Convert 1.2 megalitres to a volume in
    • litres
    • kilolitres
    • gigalitres
    • millilitres
  2. "The minimal lethal dose of arsenic in adults is about 1mg per kilogram of body mass per day". Calculate the mass of the dose of arsenic that would be lethal in each case below:
    • 1 dose given in 1 day to a man weighing 90kg
    • 1 dose given in 1 day to a woman weighing 65kg
    • 1 dose given in 1 day to a child weighing 30kg
    • 1 dose given 3 times a day with meals to a person weighing 70kg.
  3. The arsenite ion has the formula AsO33- and the arsenate ion has the formula AsO43-.
    • Write the formula for potassium arsenite
    • Write the formula for potassium arsenate
    • Write the formula for calcium arsenite
    • Write the formula for barium arsenate
    • Write the formula for ammonium arsenate
    • Write the formula for copper (II) arsenite
    • Write the formula for lead (II) arsenate
  4. Give the oxidation state (number) of arsenic in each of the following:
    • AsO33-
    • AsO43-
    • As2S3
    • As4S4
    • HAsO32-
    • As2O3
    • AsCl3
  5. Calculate the concentration of arsenic ions in mol/L in 1L of Fowler's Solution using the recipe provided in the article (assume all the arsenic present is in the form of arsenic ions).
  6. For a 0.5mL dose of Fowler's Solution, calculate
    • the mass of arsenic present in grams
    • the mass of arsenic present in milligrams
    • the concentration of arsenic in parts per million
  7. Assuming 10g hair samples were tested for arsenic
    • What is the mass of arsenic present in a healthy persons hair if the normal level is 1ppm?
    • The safe limit for arsenic in hair is 3ppm, what mass of arsenic is this equivalent to ?
    • Napoleon's hair was found to contain between 17ppm and 33ppm arsenic. Convert each of these concentrations to a mass of arsenic.
  8. For the water tested in the Asian tube wells:
    • convert 4000ppb to a concentration in ppm
    • calculate the mass of arsenic in 1L of water if the concentration is 50ppb
    • convert the safe limit for arsenic in drinking water, 10μg/L, to a concentration in mol/L
    • calculate the mass of arsenic present in 1L of drinking water that contains 10μg/L arsenic

Reference

Friday, February 18, 2011

Lithium for a Longer Life

Lithium is the 25th most abundant element in the Earth's crust, with approximately 20mg of lithium present in every kilogram of crustal material. It is a soft, silvery-white metal that belongs to Group I (alkali metals). It is so highly reactive that when it is cut in air it will quickly corrode before your eyes. In the presence of water, lithium reacts to form hydrogen gas and lithium hydroxide in aqueous solution. Because it is so reactive, lithium does not occur free in nature, it only appears naturally in compounds.

Lithium-6 and lithium-7 were among the three elements synthesized in the Big Bang according to cosmological theory, the other two elements being hydrogen and helium. Lithium is present in cooler, less massive brown dwarf stars but is destroyed in hotter red dwarf stars, so its presence in the stars' line emission (atomic) spectra can be used to differentiate between these two kinds of stars in the so-called 'lithium test'.

Trace amounts of lithium ions are present in the oceans. The total lithium content of seawater is estimated to be 230 billion tonnes, and is present in concentrations of about 0.2 parts per million.
Lithium is also present in trace amounts in plants and animals. Vertebrates contain lithium in concentrations between 21 and 763 parts per billion.

Lithium salts, such as lithium carbonate, have been to shown to be useful as mood-stabilizing drugs. Therapeutically useful amounts of lithium are between 1.0 and 1.2 millimolar, which is only slightly lower than the toxic amount of 1.5 millimolar.

Scientists at the Friedrich Schiller University Jena have just demonstrated that a regular uptake of lithium could lead to a longer life. The scientists studied the impact of lithium in a concentration that is regularly found in ordinary tap water by analyzing the mortality rate in 18 adjacent Japanese municipalities in relation to the amount of lithium contained in tap water from the respective regions. They found that the mortality rate was considerably lower in those municipalities with more lithium in the drinking water.

Reference
Kim Zarse, Takeshi Terao, Jing Tian, Noboru Iwata, Nobuyoshi Ishii, Michael Ristow. Low-dose lithium uptake promotes longevity in humans and metazoans. European Journal of Nutrition, 2011; DOI: 10.1007/s00394-011-0171-x


Further Reading
Elements and Compounds
Metals and Non-metals
Trends in Group I
Electron Configuration
Naming Ionic Compounds
Writing Ionic Formulae
Parts per Million Concentration
Molarity Concentration
Emission (Atomic) Spectra
Isotopes
Relative Atomic Mass

Study Questions
  1. What is the atomic number of lithium?
  2. What is the simple electron configuration for an atom of lithium?
  3. What is the expected charge on a lithium ion? Explain your answer.
  4. Write the formula for each of these compounds:
    • lithium hydroxide
    • lithium carbonate
  5. Write a balanced chemical equation to represent the reaction between lithium metal and water.
  6. For each of the following isotopes of lithium, give the number of protons and the number of neutrons present:
    • lithium-6
    • lithium-7
  7. Given that the relative atomic mass of lithium is 6.941, and assuming lithium-6 and lithium-7 are the only isotopes of lithium present, calculate the abundance of each isotope.
  8. Convert the following to concentrations in molL-1 (M):
    • 0.2ppm
    • 1.2millimolar
    • 1.5millimolar
    • 21ppb
    • 763ppb
  9. If the total lithium content of seawater is estimated to be 230 billion tonnes, and is present in concentrations of about 0.2 parts per million, what is the mass of seawater present on Earth?
  10. In the 'lithium test' for stars, what spectral lines do you expect to see in brown dwarf stars that will not be present in red dwarf stars?